ISHIMA RACING

E10S_1

RAVE E1.0S

PRO VERSION 1/8th scale
Electric powered buggy

Height : 160mm
Weight : 3690g
Length : 485mm
Width : 305mm

RVB-E001.RTR
Ready to Run version

The overall weight of only 3690gr, the low center of gravity and the balanced load distribution provides outstanding driving dynamics and excellent track stability under any racing conditions.

The ISHIMA signature lay-down shock system and the optimized suspension geometries provides easy handling and precision controllability , no matter if you drive on flat fast tracks, bumpy technical tracks or sky-high jumps. The ISHIMA RAVE E1.0S will give you full confidence from the first moment you pull the throttle trigger..

ELECTRIC POWER !
1/8th scale Electric Powered buggy

Following the revolution in electric power systems, Ishima brings you a dedicated electric 1/8th off road buggy.

This is not just a converted ic model, the RAVE EP is designed from the ground up as a brushless, lithium powered competition racing buggy. With a low center of gravity and perfect balance as top requirements,

Ishima has found the perfect way to adapt the electric drive to the proven lightweight RAVE drivetrain. With a mechanical brake, you will have full controllability and smooth braking front and rear as it should be. The geartrain is standard equipped with bullet proof hardened steel conical gears and 4 mm shocktowers hold the big bore shocks for optimal reliability.

The battery compartiments are made of high grade plastics and offer fast battery replacement and added protection and provides an optimal balance.

The component layout places the speedcontroller and motor as far away from the receiver as possible to minimize the risk of interference and puts the drivetrain dead in the center.

The future is here and it’s called RAVE E 1.0

Chassis_diagram_E_S_615px

	HIGH DOWNFORCE WING
	4mm MACHINED 7075 T6 SHOCK STAYS
	HARDENED STEEL HELICAL BEVEL AND PINION GEARS
	DUAL COMPOSITE CHASSIS STIFFENERS Soft mounted to increase traction. Double bolted to the chassis for reliability.
	BATTERY COMPARTMENT Fits all popular Li-Po sizes and offers additional protection. Fast exchange battery system.
	CNC MACHINED MOTORMOUNT Improved motor cooling. Fits standard brushless motors. Adjustable to accept different pinion sizes. Rigid design for perfect gear mesh.
	REVOLUTIONARY CONNECTOR LOCK SYSTEM Two stage locking system. Fits all hard case Li-Po batteries. Quick release and battery system.
	DUAL BRAKE SYSTEM Individually adjustable brake system. Perfectly controllable. No need for electronic brake function.
	BIG BORE SHOCKS 17mm lay down shock absorbers. Hardened steel shock shafts. Hard coated for reduced wear.
	PLANETARY DIFFERENTIAL GEARS High compaction casted steel. Competition tested. Low friction and low wear.
	ENGINEERED RADIO TRAY Single compact unit, completely removable with just 5 screws. Both radio tray and battery compartments can be removed for maintenance without touching the drivetrain.
	OPTIMIZED BALANCE With the Li-Po batteries on the side, the chassis is perfectly balanced in the longitudinal axis to avoid any roll motion during jumps. The central mounted motor places the drivetrain perfectly centered on the chassis for a friction free power transfer. The higher mounted motor provides the necessary roll moment to increase the grip during cornering.

Perfectly finished CNC machined chassis
Ideally balanced components layout
Dedicated for electric power only
Heavy duty 4 mm shock stays front and rear
Front and rear anti-roll bar for improved stability
Simple maintenance thanks to removable radio tray
Front and rear mechanical brake give the same controllability as its ic counterpart
Powerful brushless motor is on the par with competition ic engines
Programmable 80 A speed controller allows you to customize power curve
Optimal separation of power system and radio components reduces the risk of interference
Ultra low center of gravity
New bullet proof hardened spiral bevel and diff gear make the drivetrain very free and require zero maintenance

Adapts to any brushless motor and speed controller
Double rear soft mounted stiffeners
Ultra tough hardened steel drivecups
Front CVD’s give improved drive efficiency
Race-proven planetary differential gears
Heat treated CNC machined steel spur gear
New big bore shock absorbers give consistent damping from start to finish
Powerful 6 kg servos give great steering and braking authority
Medial Pro Sportsline tires included, pre-glued
Pistol grip FM radio for interference free control
Pre-painted and pre-cut Polycarbonate body
Professionally and carefully assembled

Speed Controller

Programmable 80 A speed controller with large heatsink included.

ISHI-EP-R-3418_600px245

Brushless Motor

High power brushless motor included. CNC machined motormount.

DSC_3413_1_modifiedS

Radio Tray

Lay down steering servo with inboard linkage, the ingenious radio tray can be removed with just 5 screws.

DSC_3412_1_600px245

Low CG

Extremely low center of gravity thanks to laydown suspension and chassis layout.

ISHI-242_600px245

The RAVE E1.0S is supplied as a “Ready To Run” car. Although RTR cars are mostly fitted with cheaper electronics to cut down the cost, we at ISHIMA racing selected high quality components as the RAVE E1.0S is not just a RTR buggy, but a pure racing buggy “out of the box”

The car is factory fitted with: Pistol grip FM radio

Features:

Digital proportional FM system
Dual rate adjustment for the steering
EPA adjustment Left & Right steering
EPA adjustment Throttle & Brake
Servo reverse function
Charging jack
6 kg metal gear high torque steering servo
6 kg high torque brake servo


Dual rate adjustment for the steering EPA adjustment Left & Right steering EPA adjustment Throttle & Brake Servo reverse function	Built-in charging jack	6kg metal gear high torque steering servo 6kg high torque brake servo

RTR VERSION (RVB-R001.RTR)

2 hardcase 2s Li-Po batteries :
- 3600 mAh
- 4900 mAh
- 5400 mAh
8 pcs AA batteries

home - racing news - new products - cars - media - where to buy - support - Ishima racing team